+974-7731-3183, +974-3042-4844 info@affixscaffolding.com
Select Page

Not to be used near Electricity

Push Pull Prop

Model No. FS02

  • The Push Pull Prop consists of two telescopically slidable pipes.
  • The displacement can be adjusted by means of a threaded ring nut and a pin inserted into the holes of the inner pipe
  • This structure enables it to perform two actions, the regular pushing action (like normal props do) and the pulling action.
  • Push Pull Props are made from 60mm OD x 3.2mm wall thickness and inner tube of 48.3mm OD x 3.2mm wall thickness steel tubes.
  • This Prop is used for temporary and safe stabilization of structures during the casting step, whether formworks, wooden panels, or prefabricated elements of various types.
  • Formwork shoring prop is mainly made up of base plate, outer tube, inner tube, swivel nut, G Pin. Its structure is simple and flexible, easy to assemble and disassemble.
  • The push-pull prop, with swivel end plates, can bear both vertical, diagonal and horizontal loads.
  • Due to the high strength capability, the push-pull props are used in construction of houses and high-rise buildings.
  • Push-Pull Props are designed for use wherever an adjustable inclined strut is required.
  • These Props are Available in a wide range of sizes.
  • Outer Tube OD 60mm; Inner Tube OD 48.3mm; Tube thickness 3.2mm.

Specifications

Push Pull Prop

Product Code Description Closed Height (mm) Extn. Height (mm) Inner Pipe Length (mm) Outer Pipe Length (mm) Net Weight Kg (Painted)
FS0239 Push Pull Jack 3.90 Mtr 2500 3900 2500 1700 17.60

 

Video

Currently Unavailable

3D Display

Currently Unavailable